Mold And Me: Fighting Back When Mildew Spreads

There is nothing worse than finding mold in your home. Not only is it disgusting, but it’s a health hazard which puts the whole family at risk. Oh, and there is the fact that it’s almost impossible to move! Often, homeowners have to call in the experts and pay a fortune to get their house back. Sadly, the average property owner doesn’t have the funds and can’t afford an exterminator. So, are you supposed to sit at home, staring at the green walls and breathing in toxic oxygen? No, of course you aren’t. What you should do is tackle the situation head-on and chip away at the mold slowly but surely.



For the people who don’t know how to do that, below is a selection of tips which should help.


Keep The Meter Running

Because the price of energy is sky high at the moment, turning off the central heating seems like a savvy move. After all, it will save you money. Even if it does, which studies say it does not, there is a bigger, mold problem to consider. The bacteria love wet and muggy conditions and will spread if the environment is right. Obviously, you have to make sure the house is inhospitable, which is where the central heating comes into play. Keeping the property nice and warm should prevent mold from growing and covering the walls as there is less moisture in the air. If you are worried about the cost, play with the thermostat until you find the perfect temperature.

Air It Out

Another essential addition to a property that struggles with mold is ventilation. Heat helps, but constant exposure to air is the key as it removes moisture from the air. There are lots of ways to introduce fresh O2 to the house, but opening a window is the cheapest and easiest. Cracking the double glazing an inch or two, especially in the wintertime, opens your home to the elements and wind will rush in. Should the idea of freezing to death while taking a shower not seem appealing, there is an alternative. Humidifiers and dehumidifiers constantly suck the moisture out of the air and replace it with fresh oxygen. Https:// has a couple of examples if you are unsure. The key is to make sure the air is clean throughout the entirety of the house. Otherwise, the bacteria will spread and won’t stop.



Take Aim

Some areas of the home are notorious for housing mold. Take the bathroom as an example because they are usually poorly ventilated. Kitchen walls also seem to be hospitable. Once you know which parts of the house are the worst hit, you can begin to aim. What this means is that you can concentrate on the rooms a little more than the rest of the property. For example, installing a dehumidifier and keeping the window open could kill the mold. Or, painting the kitchen walls may take precedence over painting anywhere else in the house. No one wants to look at green walls while they are eating pasta and pesto! Https:// says you should audit your home. Does the basement flood? Do the upstairs windows condensate? If the answer is yes, you should take care of these issues first.


And Fully Equip

In the past, homeowners had to accept the fact that they couldn’t mold-proof their homes. All they could do was try and make it as hard as possible for the bacteria to grow. Fast forward a couple of decades and the same theory holds up, but it’s easy for current property owners to stop the spread. Why? It’s because of new household materials which are mold-free, such as paperless drywall. Going paperless is something offices do, but it can help houses too as it prevents water absorption. As soon as the moisture hits the walls, the fiberglass makes it water resistant and less likely for mold to grow.


Directorial Debut

Moisture is the in the air but it’s also in water, and H2O can leak into the property. Think about your roof for a moment. How many times has it let in water when a slate came loose? And, how often did that lead to a damp patch or mold and mildew appearing on the ceilings? Well, the same can happen anywhere in the house if water gets through the property’s defenses. With this in mind, focus on directing H2O away from your home. You may start by clearing the gutters and making sure they can handle a strong shower. Or, you may irrigate the garden so that excess water flows away from the main building.

The key is not to sit back and do nothing. Mold won’t go away unless you fight back.

Speak Your Mind